China factory Energy Efficient Operation Swl Worm Gear Screw Elevator for Utility Savings bevel spiral gear

Product Description

 

Product Model SWL2.5, SWL5, SWL10, SWL15, SWL20, SWL25, SWL35, SWL50, SWL100, SWL120
Product Description Basic lifting component, compact structure, small size, light weight, no noise, safe and convenient, flexible use, high reliability, wide power source, multiple supporting functions, long service life
Usage Single or combined use, can accurately control the adjustment of lifting or pushing height according to a certain program, can be directly driven by motor or other power, can also be manual
Lifting Efficiency and Load Capacity Special and advanced technology has been developed to improve the overall performance of the jack
Structural Type Type 1 – Screw moves axially; Type 2 – Screw rotates, nut moves axially
Assembly Type Type A – Screw/nut moves upwards; Type B – Screw/nut moves downwards
Screw Head Type Type 1 structure screw head: Type I (cylindrical), Type II (flange), Type III (threaded), Type IV (flat head); Type 2 structure screw head: Type I (cylindrical), Type III (threaded)
Transmission Ratio Ordinary speed ratio (P), slow speed ratio (M), medium speed ratio (F) can be customized according to user requirements
Lifting Load Capacity 2.5kN, 5kN, 10kN, 15kN, 20kN, 25kN, 35kN, 50kN, 100kN, 120kN
Screw Protection Type 1 structure: basic type (no protection), anti-rotation type (F), with protective cover (Z), anti-rotation and protective cover (FZ); Type 2 structure: basic type (no protection)

Product description: SWL series worm gear screw lift is a basic lifting component with many advantages such as compact structure, small volume, light weight, no noise, safety and convenience, flexible use, high reliability, wide power source, many supporting functions and long service life. It can be used singly or in combination, can adjust the height of lifting or advancing accurately according to certain procedures, and can be driven directly by electric motor or other power, or manually. In order to improve the efficiency and carrying capacity of SWL series worm gear screw lift, special and advanced technology is developed to improve the comprehensive performance of the lift to meet the requirements of the majority of customers. SWL series worm gear screw lift has different structure types and assembly types, and the lifting height can be customized according to the user’s requirements.

RFQ

Q:What information should I tell you to confirm speed reducer?

A: Model/Size, Transmission Ratio, Shaft directions & Order quantity.

 

Q:What if I don’t know which gear reducer I need?

A:Don’t worry, Send as much information as you can, our team will help you find the right 1 you are looking for.

 

Q:What should I provide if I want to order NON-STANDERD speed reducers?

A: Drafts, Dimensions, Pictures and samples if possible.

 

Q:What is the MOQ?

A: It is OK for 1 or small pieces trial order for quality testing.

 

Q:How long should I wait for the feedback after I send the inquiry?

A: Within 6 hours

 

Q:What is the payment term?

A:You can pay via T/T(30% in advance+70% before delivery), L/C ,West Union etc
 

Standard or Nonstandard: Nonstandard
Application: Electric Cars, Motorcycle, Marine, Agricultural Machinery, Car
Spiral Line: Right-Handed Rotation
Head: Single Head
Reference Surface: Toroidal Surface
Type: ZK Worm
Samples:
US$ 100/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

How do you install a screw gear system?

Installing a screw gear system, also known as a worm gear system, requires careful consideration and precise execution. Here’s a detailed explanation of the steps involved in installing a screw gear system:

  1. Design and Selection: Before installation, it is crucial to design and select the appropriate screw gear system for the specific application. Consider factors such as required torque, speed, load capacity, gear ratio, and environmental conditions. Choose a screw gear system that matches the application’s requirements and ensure compatibility with other components and machinery.
  2. Prepare the Components: Gather all the necessary components for the screw gear system installation, including the worm gear, worm wheel, bearings, shafts, and any additional accessories or support structures. Inspect the components for any damage or defects and ensure they are clean and properly lubricated.
  3. Mounting the Worm Gear: Begin the installation by mounting the worm gear. Securely attach the worm gear to the appropriate shaft or motor using suitable fasteners. Ensure that the alignment of the worm gear is accurate, and it is properly centered on the shaft to avoid any misalignment issues during operation.
  4. Mounting the Worm Wheel: Once the worm gear is in place, mount the worm wheel. The worm wheel should be positioned in such a way that it meshes smoothly with the worm gear. Ensure that the worm wheel is securely mounted, and any necessary bearings or supports are properly installed to maintain stability and alignment.
  5. Alignment and Adjustment: Proper alignment of the screw gear system is crucial for its efficient operation. Ensure that the worm gear and worm wheel are correctly aligned both axially and radially. Check for any excessive play or binding in the system. Make necessary adjustments to achieve optimal alignment and smooth meshing between the gears.
  6. Lubrication: Apply the recommended lubricant to the screw gear system. Proper lubrication is essential to minimize friction and wear, ensuring smooth operation and extending the system’s lifespan. Follow the manufacturer’s guidelines regarding the type and amount of lubricant to use.
  7. Testing and Fine-Tuning: After installation, perform thorough testing of the screw gear system. Check for smooth operation, proper engagement between the gears, and any abnormal noise or vibration. Fine-tune the system if necessary, making adjustments to achieve the desired performance and ensure optimal functionality.
  8. Regular Inspection and Maintenance: Once the screw gear system is installed and operational, it is important to establish a regular inspection and maintenance schedule. Regularly inspect the system for signs of wear, lubrication levels, and any potential issues. Perform routine maintenance tasks such as cleaning, lubrication replenishment, and component replacement as needed.

It is crucial to follow the manufacturer’s guidelines and specifications during the installation process. If unsure about any aspect of the installation, consult with experts or refer to the manufacturer’s documentation for detailed instructions specific to the screw gear system being installed.

screw gear

Can screw gears be used in both vertical and horizontal orientations?

Yes, screw gears, also known as worm gears, can be used in both vertical and horizontal orientations. The suitability of screw gears for a particular orientation depends on several factors. Here’s a detailed explanation of using screw gears in vertical and horizontal orientations:

Vertical Orientation:

Screw gears can be used in vertical orientations, such as when the worm gear is positioned vertically above or below the worm wheel. However, there are some considerations to keep in mind:

  • Self-Locking Capability: One advantage of screw gears is their self-locking capability, which means they can hold position without additional braking mechanisms. In vertical orientations, this self-locking feature can be beneficial, especially when the load needs to be held in position without the need for external support or brakes.
  • Lubrication: Proper lubrication is crucial in vertical screw gear applications to ensure efficient power transmission and minimize wear. Gravity can affect lubricant distribution, so it is essential to use lubricants with appropriate viscosity and ensure adequate lubrication reaches all gear surfaces even in a vertical configuration.
  • Load and Torque: The weight of the load being transmitted through the screw gear system is an important consideration in vertical orientations. Vertical applications often involve lifting or supporting heavy loads, and the torque requirements can be high. It is important to ensure that the screw gear system is designed to handle the specific load and torque demands of the vertical application.

Horizontal Orientation:

Screw gears can also be used in horizontal orientations, where the worm gear and worm wheel are positioned parallel to the ground. Here are some considerations for using screw gears in horizontal orientations:

  • Lubrication: Proper lubrication is still important in horizontal screw gear applications to minimize friction, wear, and heat generation. The lubricant viscosity and type should be chosen to provide adequate film thickness and reduce sliding friction between the gear surfaces.
  • Efficiency: Screw gears generally have lower mechanical efficiency compared to some other gear types. In horizontal orientations, where efficiency is critical for power transmission, it is important to consider the gear design and material selection to minimize energy losses and maximize the overall system efficiency.
  • Load Distribution: In horizontal orientations, the load distribution between the worm gear and the worm wheel is typically more uniform compared to vertical orientations. This can help reduce tooth stresses and increase the overall stability of the gear system.
  • Mounting and Support: Proper mounting and support of the screw gear system are important in horizontal orientations to ensure alignment and minimize vibrations. Adequate support structures, such as rigid bases or frames, should be used to maintain the gear system’s stability and integrity.

In summary, screw gears can be used in both vertical and horizontal orientations. However, the specific application requirements, including load, torque, lubrication, and efficiency considerations, should be carefully evaluated to ensure the screw gear system is suitable and designed to meet the demands of the particular orientation.

screw gear

Can you explain the concept of screw gear threads and their functions?

Screw gear threads play a crucial role in the operation and functionality of screw gears, also known as worm gears. The threads are an essential component of the worm, which is the cylindrical gear with a helical thread wrapped around it. Here is a detailed explanation of the concept of screw gear threads and their functions:

  • Thread Design: The threads on a screw gear, specifically the helical thread on the worm, are designed in a helical shape, resembling the threads of a screw. The helical thread is wrapped around the cylindrical body of the worm, creating a continuous spiral path along its length. The pitch of the thread refers to the distance between successive thread crests or valleys.
  • Meshing with Worm Wheel: The primary function of the screw gear threads is to mesh with the teeth of the worm wheel. The helical thread of the worm engages with the teeth of the worm wheel, creating a sliding contact between them. As the worm rotates, the helical thread drives the rotation of the worm wheel, transmitting rotational motion and power.
  • Gear Reduction and Torque Multiplication: The helical design of the screw gear threads allows for a large number of teeth on the worm wheel to be engaged at any given time. This results in a high gear reduction ratio, meaning that for each revolution of the worm, the worm wheel rotates by a smaller fraction. The gear reduction ratio enables torque multiplication, making screw gears suitable for applications requiring high torque output.
  • Precision Positioning: Screw gear threads are crucial for achieving precise positioning in applications where accuracy is essential. The fine pitch of the helical thread allows for small incremental movements, enabling precise control over the rotation of the worm wheel. This feature is particularly advantageous in applications such as robotics, where accurate positioning and motion control are necessary.
  • Self-Locking Action: The helical thread design of screw gears gives them a self-locking capability. When the worm is not rotating, the friction between the helical thread and the teeth of the worm wheel tends to hold the gear system in place. This self-locking action prevents the worm wheel from backdriving the worm, providing inherent braking or locking functionality. It ensures that the gear mechanism maintains its position without the need for additional braking or locking mechanisms.
  • Efficiency and Lubrication: The sliding action between the screw gear threads and the teeth of the worm wheel introduces more friction compared to other types of gears with rolling motion. This sliding motion affects the efficiency of the gear mechanism, resulting in higher energy losses and heat generation. Proper lubrication with appropriate lubricants is essential to minimize wear, reduce friction, and improve the overall efficiency of the screw gears.

Overall, screw gear threads enable the meshing and transmission of rotational motion and power between the worm and the worm wheel. They facilitate gear reduction, torque multiplication, precise positioning, and self-locking action. Understanding the design and functions of screw gear threads is crucial for utilizing screw gears effectively in various applications.

China factory Energy Efficient Operation Swl Worm Gear Screw Elevator for Utility Savings bevel spiral gearChina factory Energy Efficient Operation Swl Worm Gear Screw Elevator for Utility Savings bevel spiral gear
editor by CX 2023-09-07

Tags: