China factory Swl Series Helical Cast Iron Mechanical Manual Worm Gear Hydraulic Screw Jack with high quality

Product Description

1.Convenient to adjust
2.Wide range of ratio
3.Easy to install
4.high torque
Application Industries:
Our SWL series screw jacks are widely used in the industries such as metallurgy,mining,hoisting and transportation, electrical
power,energy source,constrction and building material,light industry and traffice industry

Screw Jacks in construction

Often found in climbing mechanism of construction,the screw jacks use physical means to raise and lower loads, which typically range from 5 tons to 30 tons. A screw jack is a common type of mechanical jack, which works via a motor and gearbox by an operator. A screw uses the shape of its threads to raise or lower the load, or a traveling nut does the lifting while the screw turns in place. Mechanical jacks are self-locking(not for ball screw), which means that when power is removed from the jack, the screw stays in place until power resumes. This setup makes mechanical jacks safer than their hydraulic counterparts, because users don’t have to fear a loss of power. The main components of screw jacks are; trapezoidal lifting screw also known as lead screw, worm screw, worm gear and gear housing. A worm screw is rotated manually or by a motor. With the rotation of the worm gear, the lead screw in it moves upwards or downwards linearly. The feed rate of the screw depends on the turning speed, the number of teeth of the gears and the size of the screw pitch. In some models of jackscrews, The lifting screw does not move up and down. It only rotates around its axis. A lifting nut (also known as a travelling nut) moves along the lead screw. The lifting nut of the screw jack is made of bronze to decrease friction.

Product Parameters

MODEL

 

SWL2.5

SWL5

SWL10

SWL15

SWL20

SWL25

SWL35

Maximum lifting force (kN)

 

25

50

100

150

200

250

350

Screw thread size

 

Tr30*6

Tr40*7

Tr58*12

Tr58*12

Tr65*12

Tr90*16

Tr100*20

Maximum tension (kN)

 

25

50

99

166

250

350

Worm gear ratio (mm)

P

1/6

1/8

3/23

1/8

3/32

3/32

 

M

1/24

1/24

1/24

1/24

1/32

1/32

Worm non rotating stroke (mm)

P

1.0

0.875

1.565

1.56

1.5

1.875

M

0.250

0.292

0.5

0.5

0.5

0.625

Maximum elongation of screw rod under tensile load (mm)

 

1500

2000

2500

3000

3500

4000

Maximum lifting height at maximum pressure load (mm)

The head of the screw rod is not guided

250

385

500

400

490

850

820

Lead screw head guide

400

770

1000

800

980

1700

1640

Worm torque at full load(N.m)

P

18

39.5

119

179

240

366

464

M

8.86

19.8

60

90

122

217

253

efficiency(%)

P

22

23

20.5

 

19.5

16

18

M

11

11.5

13

 

12.8

9

11

Weight without stroke(kg)

 

7.3

16.2

25

 

36

70.5

87

Weight of screw rod per 100mm(kg)

 

0.45

0.82

1.67

 

2.15

4.15

5.20

Detailed Photos

 

 

 

SWL Series worm screw Jack:

1.The elevator is a combination of turbine pair and trapezoid screw rod to complete the lifting and lowering of objects. 2.Compact structure, light weight, safety and reliability, long service life, convenient installation

3.Self-locking function in the static state.

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Related Products

 

Packaging & Shipping

 

Company Profile

 

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

Can you provide examples of machinery that use screw gears?

Screw gears, also known as worm gears, are widely used in various machinery and mechanical systems. These gears offer advantages such as high gear ratios, compact design, and smooth torque transmission. Here are some examples of machinery that commonly utilize screw gears:

  • Elevators: Screw gears are commonly employed in elevator systems to provide vertical movement. The worm gear and worm wheel arrangement allows for controlled and precise lifting and lowering of the elevator car.
  • Conveyors: Screw gears are utilized in conveyor systems to transport materials or products horizontally or at an incline. The screw gear system ensures smooth and efficient movement of the conveyor belt or other conveying elements.
  • Automotive Applications: Screw gears are found in various automotive applications, including power windows, convertible tops, and seat adjusters. They enable the conversion of rotational motion into linear motion, allowing for precise control and adjustment of these components.
  • Mechanical Presses: Screw gears are used in mechanical presses to generate high forces for operations such as metal forming, stamping, and pressing. The screw gear system provides the necessary torque and power transmission required for these heavy-duty applications.
  • Valve Actuators: Screw gears are employed in valve actuators to control the opening and closing of valves in industrial processes. The worm gear mechanism allows for precise and reliable valve positioning and control.
  • Packaging Machinery: Screw gears are utilized in packaging machinery, such as filling machines and capping machines, to control the movement and positioning of packaging components. They ensure accurate and synchronized operations during the packaging process.
  • Machine Tools: Screw gears are commonly found in machine tools, including milling machines, lathes, and precision equipment. They enable precise control of the tool movement, feeds, and positioning, ensuring accurate machining operations.
  • Constructions Machinery: Screw gears are used in construction machinery, such as cranes and lifting equipment, to control the movement of load-carrying components. The worm gear system provides the necessary torque and stability required for lifting heavy loads.
  • Food Processing Equipment: Screw gears are employed in food processing equipment, such as mixers and extruders, to control the mixing, blending, and extrusion processes. They ensure accurate and consistent product quality and texture.
  • Robotic Systems: Screw gears are utilized in robotic systems for various applications, including robotic arms and grippers. They enable precise and controlled movement, allowing robots to perform complex tasks with accuracy.

These are just a few examples of the many machinery and systems that utilize screw gears. Their versatility and ability to provide precise motion control make them suitable for a wide range of industrial and mechanical applications.

screw gear

How do you address thermal expansion and contraction in a screw gear system?

Addressing thermal expansion and contraction in a screw gear system is crucial to ensure the proper functioning and longevity of the system. Thermal expansion and contraction occur when a system is subjected to temperature changes, leading to dimensional changes in the components. Here’s a detailed explanation of how to address thermal expansion and contraction in a screw gear system:

  1. Material Selection: Choose materials for the screw gear system components that have compatible coefficients of thermal expansion (CTE). Using materials with similar CTE can help minimize the differential expansion and contraction between the components, reducing the potential for misalignment or excessive stress. Consider materials such as steel, bronze, or other alloys that exhibit good dimensional stability over the expected operating temperature range.
  2. Design for Clearance: Incorporate proper clearances and tolerances in the design of the screw gear system to accommodate thermal expansion and contraction. Allow for sufficient clearance between mating components to accommodate the expected dimensional changes due to temperature variations. This can prevent binding, excessive friction, or damage to the gears during temperature fluctuations.
  3. Lubrication: Utilize appropriate lubrication in the screw gear system to mitigate the effects of thermal expansion and contraction. Lubricants can help reduce friction, dissipate heat, and provide a protective film between the mating surfaces. Select lubricants that offer good thermal stability and maintain their properties across the expected temperature range of the system.
  4. Thermal Insulation: Implement thermal insulation measures to minimize the exposure of the screw gear system to rapid temperature changes. Insulating the system from external heat sources or environmental temperature fluctuations can help reduce the thermal stresses and minimize the effects of expansion and contraction. Consider using insulating materials or enclosures to create a more stable temperature environment around the screw gear system.
  5. Temperature Compensation Mechanisms: In certain applications, it may be necessary to incorporate temperature compensation mechanisms into the screw gear system. These mechanisms can actively or passively adjust the position or clearance between components to compensate for thermal expansion or contraction. Examples include thermal expansion compensation screws, bimetallic elements, or other devices that can accommodate dimensional changes and maintain proper alignment under varying temperatures.
  6. Operational Considerations: Take into account the thermal characteristics of the environment and the operational conditions when using a screw gear system. If the system is expected to experience significant temperature variations, ensure that the operating parameters, such as load capacities and operating speeds, are within the design limits of the system under the anticipated temperature range. Monitor and control the temperature of the system if necessary to minimize the effects of thermal expansion and contraction.
  7. System Testing and Analysis: Conduct thorough testing and analysis of the screw gear system under various temperature conditions to assess its performance and behavior. This can involve measuring dimensional changes, analyzing gear meshing characteristics, and evaluating the system’s ability to maintain proper alignment and functionality. Use the test results to validate the design, make any necessary adjustments, and optimize the system’s performance under thermal expansion and contraction effects.
  8. Maintenance and Inspection: Establish a regular maintenance and inspection routine for the screw gear system to monitor its performance and address any issues related to thermal expansion and contraction. This can involve checking clearances, lubrication levels, and the overall condition of the system. Promptly address any signs of excessive wear, misalignment, or abnormal operation that may be attributed to temperature-related effects.

By considering material selection, design clearances, lubrication, thermal insulation, temperature compensation mechanisms, operational considerations, and regular maintenance, it is possible to effectively address thermal expansion and contraction in a screw gear system. These measures help ensure the system’s reliability, minimize wear and damage, and maintain the desired performance and functionality over a range of operating temperatures.

screw gear

How do screw gears differ from other types of gears?

Screw gears, also known as worm gears, possess distinct characteristics that set them apart from other types of gears. Understanding these differences is essential for selecting the appropriate gear mechanism for a given application. Here is a detailed explanation of how screw gears differ from other types of gears:

  • Gear Configuration: Screw gears consist of a worm (a cylindrical gear with a helical thread) and a worm wheel (a toothed wheel). In contrast, other types of gears, such as spur gears, bevel gears, or helical gears, have different geometric configurations and tooth arrangements.
  • Helical Design: The helical design of screw gears is a defining characteristic. The worm has a helical thread wrapped around it, resembling a screw, while the teeth of the worm wheel are typically perpendicular to the helix angle. This helical arrangement allows for a sliding action between the worm and the worm wheel, resulting in specific operational characteristics.
  • High Gear Ratio: Screw gears are known for providing high gear ratios, especially compared to other types of gears. The helical design allows for a large number of teeth to be engaged at any given time. This results in a higher gear reduction ratio, making screw gears suitable for applications where a significant reduction in rotational speed or an increase in torque is required.
  • Self-Locking Capability: One of the unique features of screw gears is their self-locking capability. Due to the helical thread design, the friction between the worm and the worm wheel tends to hold the gear system in place when the worm is not rotating. This inherent self-locking property prevents the worm wheel from backdriving the worm, enabling the gear mechanism to hold a position without the need for external brakes or locking mechanisms.
  • Sliding Motion: Screw gears operate with a sliding motion between the helical thread of the worm and the teeth of the worm wheel. This sliding action introduces more friction and heat generation compared to other types of gears, such as spur gears or bevel gears, which primarily operate with rolling motion. The sliding motion affects the efficiency and lubrication requirements of screw gears.
  • Lower Efficiency: Screw gears generally have lower efficiency compared to other types of gears due to the sliding motion and increased friction. The sliding action between the worm and the worm wheel results in higher energy losses and heat generation, reducing the overall efficiency of the gear mechanism. Proper lubrication is crucial to minimize wear and improve efficiency in screw gears.

While screw gears have their unique advantages, such as high gear ratios and self-locking capabilities, they also have limitations, including lower efficiency and increased friction. Therefore, the selection of gear type should consider the specific requirements of the application, taking into account factors such as torque, speed, precision, efficiency, and the need for self-locking or high gear reduction ratios.

China factory Swl Series Helical Cast Iron Mechanical Manual Worm Gear Hydraulic Screw Jack with high qualityChina factory Swl Series Helical Cast Iron Mechanical Manual Worm Gear Hydraulic Screw Jack with high quality
editor by CX 2023-09-18

Tags: