China high quality Swl Screw Jack Lifting 10kn 10 Kn Hand Crank Screw Jack Lift 1 Ton Worm Gear Worm Gear Screw Jack Lifter spiral bevel gear

Product Description

 

Top Quality Worm Gear Screw Jacks Load Up to 200 Ton

Machine& Ball Screw Jack Actuators

Features:

1. Suitable for heavy load, low speed and low frequency; 2. Main components: precision trapezoid screw pair and high precision worm gear pair; 3. Compact design, small volume, light weight, wide drive sources, low noise, easy operation, convenient maintenance. 4. The trapezoid screw has self-locking function, it can hold up load without braking device when screw stops traveling. 5. The lifting height can be adjusted according to customer requirements. 6. Widely applied in industries such as machinery, metellurgy, construction and hydraulic equipment. 7. Top End: top plate, clevis end, threaded end, plain end

How to choose a suitable model?

Some questions can help you to choose.

Q1:Do you need screw jack of ball screw or trapezoidal screw?

Q2: How many Kg or Tons the screw jack need to lift or drop? The screw shaft length? How fast the lifting speed is ? Q3:Which the screw top?you need,as picture above?

Q4:Manual type (Hand wheel?driven) or electric motor driven type or both driven type?

 

Q5:Traveling screw (screw travelling up and down when working) or traveling nut ? (the nut travelling up and down when working),Upright or?Inverted?

Product Parameters

Type

Model

Screw thread size

Max
lifting strength
kN

Max
pull force
kN

Weight without stroke
kg

Screw weight
per 100mm

SWL

Screw jack

SWL2.5

Tr30*6

25

25

7.3

0.45

SWL5

Tr40*7

50

50

16.2

0.82

SWL10/15

Tr58*12

100/150

99

25

1.67

SWL20

Tr65*12

200

166

36

2.15

SWL25

Tr90*16

250

250

70.5

4.15

SWL35

Tr100*18

350

350

87

5.20

SWL50

Tr120*20

500

500

420

7.45

SWL100

Tr160*23

1000

1000

1571

13.6

SWL120

Tr180*25

1200

1200

1350

17.3

1.Compact structure,Small size.Easy mounting,varied types.  Can be applied in 1 unit or multiple units.

2.High reliability.Long service life; With the function of   ascending,descending,thrusting,overturning

3.Wide motivity.It can be drived by  electrical motor and manual force.

4.It is usually used in low speed situation,widely used in the fields of
metallurgy,mechanical,construction,chemical,irrigation works,mediat treatment.

Detailed Photos

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Company Profile

 

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

How do you address noise and vibration issues in a screw gear system?

Noise and vibration issues in a screw gear system can affect its performance, efficiency, and overall reliability. Addressing these issues is crucial to ensure smooth and quiet operation. Here’s a detailed explanation of how to address noise and vibration issues in a screw gear system:

  • Gear Design: The design of the screw gear system plays a significant role in minimizing noise and vibration. Proper gear tooth profile and geometry can help reduce meshing impact and ensure smooth engagement between the worm gear and the worm wheel. The selection of appropriate gear materials and surface finishes can also influence noise and vibration levels.
  • Gear Quality: High-quality manufacturing processes are essential to minimize noise and vibration in a screw gear system. Precise machining, grinding, and finishing techniques can help achieve accurate gear tooth profiles and reduce tooth surface irregularities. Using high-quality materials with appropriate hardness and strength can also contribute to smoother gear operation and reduced noise levels.
  • Lubrication: Adequate lubrication is crucial for reducing friction, wear, and noise in a screw gear system. Proper lubricant selection, considering factors such as viscosity and additives, can help minimize contact stresses and dampen vibrations. Regular lubricant maintenance, including monitoring oil levels and contamination, is necessary to ensure optimal performance and noise reduction.
  • Mounting and Alignment: Proper mounting and alignment of the screw gear system are essential to minimize noise and vibration. Misalignment or improper installation can cause uneven loading, increased friction, and excessive wear, leading to noise generation. Ensuring accurate alignment and proper mounting techniques, such as using precision shims and torque specifications, can significantly reduce noise and vibration levels.
  • Isolation and Damping: Implementing effective isolation and damping measures can help mitigate noise and vibration in a screw gear system. This can include using vibration-damping materials or isolating the system from surrounding structures using resilient mounts or bushings. Adding damping elements, such as rubber or elastomeric coatings, to critical components can also absorb vibrations and reduce noise transmission.
  • Load Distribution: Uneven load distribution can contribute to noise and vibration in a screw gear system. Optimizing the load distribution by adjusting gear parameters, such as the number of threads or the tooth lead angle, can help achieve a more balanced load sharing between the worm gear and the worm wheel. This can minimize tooth stresses and vibrations, resulting in reduced noise levels.
  • Regular Maintenance and Inspection: Ongoing maintenance and inspection are crucial for identifying and addressing potential noise and vibration issues in a screw gear system. Regularly checking for wear, damage, or misalignment, as well as monitoring noise and vibration levels, can help detect and resolve problems before they escalate. Prompt maintenance actions, such as lubricant replacement or gear realignment, can help maintain optimal system performance and reduce noise and vibration.

By implementing these measures, engineers and technicians can effectively address noise and vibration issues in a screw gear system, ensuring quieter operation, improved reliability, and enhanced overall performance.

screw gear

How do you retrofit an existing mechanical system with screw gears?

Retrofitting an existing mechanical system with screw gears, also known as worm gears, involves replacing or modifying the existing gear system to incorporate screw gears. Here’s a detailed explanation of the steps involved in retrofitting an existing mechanical system with screw gears:

  1. Evaluate the Existing System: Begin by evaluating the existing mechanical system to understand its design, function, and the specific requirements for retrofitting. Identify the type of gears currently in use and assess their limitations or shortcomings that warrant the retrofit. Consider factors such as load capacity, speed requirements, space constraints, and the desired performance improvements.
  2. Analyze Compatibility: Determine the compatibility of screw gears with the existing system. Consider factors such as available space, alignment requirements, torque and speed requirements, and the feasibility of integrating screw gears into the system. Assess whether any modifications or adaptations are needed to accommodate the screw gears effectively.
  3. Design Considerations: Based on the evaluation and compatibility analysis, develop a design plan for incorporating screw gears into the existing system. Consider aspects such as gear ratios, torque requirements, lubrication systems, mounting arrangements, and any necessary modifications to the system components or structure. Ensure that the design meets the specific performance and functional objectives of the retrofit.
  4. Select Screw Gear Components: Choose the appropriate screw gear components based on the design requirements and the specifications of the existing system. Consider factors such as gear material, tooth profile, helix angle, pitch diameter, and the number of starts. Select components that are compatible with the load, speed, and operating conditions of the retrofit application.
  5. Fabrication or Procurement: Once the screw gear components are selected, proceed with the fabrication or procurement of the required parts. This may involve manufacturing the screw gear components or purchasing them from a reliable supplier. Ensure that the components meet the specified quality standards and are suitable for the retrofit application.
  6. Installation: Install the screw gears into the existing mechanical system as per the design plan. This may involve removing the old gears and replacing them with the new screw gears or modifying the existing gear system to accommodate the screw gears. Follow proper installation procedures, ensuring correct alignment, lubrication, and torque specifications.
  7. Testing and Adjustment: After the installation, conduct thorough testing of the retrofitted system to verify its performance and functionality. Check for proper gear engagement, smooth operation, and the ability to handle the intended loads and speeds. Make any necessary adjustments or fine-tuning to optimize the performance of the retrofit and ensure its reliable operation.
  8. Documentation and Maintenance: Document the retrofit process, including design specifications, installation procedures, and any modifications made to the existing system. This documentation will be valuable for future reference, maintenance, and troubleshooting. Establish a regular maintenance schedule to inspect and maintain the retrofitted system, including lubrication, gear wear monitoring, and any recommended servicing.

Retrofitting an existing mechanical system with screw gears requires careful planning, design considerations, and proper execution. By following these steps and ensuring compatibility, proper component selection, and installation, it is possible to successfully integrate screw gears into an existing system, improving its performance, efficiency, and functionality.

screw gear

What industries commonly use screw gears?

Screw gears, also known as worm gears, find applications in a variety of industries due to their unique characteristics and functionalities. The following are some of the industries that commonly use screw gears:

  • Manufacturing and Machinery: The manufacturing and machinery industry extensively utilizes screw gears in various equipment and machinery. Screw gears are commonly found in gearboxes and power transmission systems, providing speed reduction and torque multiplication. They are used in conveyor systems, packaging machines, material handling equipment, and other industrial machinery that require controlled motion and high gear ratios.
  • Automotive: The automotive industry utilizes screw gears in specific applications, most notably in steering mechanisms. Screw gears are employed in worm and sector steering gears to convert the rotational motion of the steering wheel into the linear motion required for turning the vehicle’s wheels. The self-locking property of screw gears is advantageous in maintaining the position of the wheels after steering input.
  • Elevators and Lifts: Screw gears are widely used in the elevator and lift industry for vertical transportation systems. They play a crucial role in the elevator hoisting mechanism, where the rotational motion of the motor is converted into vertical movement. The high gear reduction ratio provided by screw gears enables controlled and precise lifting operations in elevators and lifts.
  • Valve and Actuation Systems: Screw gears have significant applications in industries that involve valve control and actuation. They are utilized in valve actuators to convert rotational motion into linear motion for precise positioning of valve stems. Screw gears are commonly found in water treatment plants, oil refineries, chemical processing facilities, and other industries that require accurate flow control and fluid system management.
  • Robotics and Automation: Screw gears play a vital role in robotics and automation systems. They are utilized in robot joints and robotic arm mechanisms to provide precise movement and positioning. Screw gears enable controlled and repeatable motion, making them suitable for applications that require accurate manipulation, such as assembly lines, pick-and-place machines, and robotic surgery systems.
  • Camera and Optics: The camera and optics industry utilizes screw gears in lens control systems. Screw gears are employed for focus adjustment, zooming, and aperture control in camera lenses and telescope mechanisms. The precise movement provided by screw gears enables accurate focusing, zooming, and optical alignment, contributing to high-quality image capture and optical performance.
  • Medical Equipment: Screw gears find applications in the medical equipment industry, particularly in devices that require controlled and precise movement. They are used in surgical robots, prosthetic limbs, medical imaging devices, and other medical instruments. Screw gears enable accurate motion control and positioning, while their self-locking property is advantageous for maintaining stable positions and preventing undesired movement.
  • Security Systems: Screw gears are utilized in security systems, including combination locks and safes. They provide the mechanical advantage necessary for rotating the locking mechanisms and ensuring secure operation. The self-locking property of screw gears adds an extra layer of security by preventing unauthorized access through reverse rotation or manipulation.

These are just a few examples of the industries that commonly use screw gears. The unique capabilities of screw gears, such as high gear ratios, precise motion control, and self-locking functionality, make them valuable in various sectors where efficient power transmission, accurate positioning, and controlled movement are essential.

China high quality Swl Screw Jack Lifting 10kn 10 Kn Hand Crank Screw Jack Lift 1 Ton Worm Gear Worm Gear Screw Jack Lifter spiral bevel gearChina high quality Swl Screw Jack Lifting 10kn 10 Kn Hand Crank Screw Jack Lift 1 Ton Worm Gear Worm Gear Screw Jack Lifter spiral bevel gear
editor by CX 2023-09-04

Tags: