China supplier Sml Series Worm Gear Screw Jack Electric Screw Jack Bevel Gear Screw Jack top gear

Product Description

Customise Now

 

SWL series worm screw jack

 

 

Worm Screw Jack
Screw-Worm Jack or screw lift lifts widely used in machine building, metallurgy, construction, irrigation equipment and other industries, is starting up, and dropped through accessories advance, overturned and position adjustment and other functions at various altitudes. SWL is a worm screw-lift crane components foundation with compact structure, small size and light weight. Sources extensive, no noise, easy installation, the use of flexible, multi-function, supporting forms, high reliability, long life and many other advantages. Can be single or in combination, can be controlled accurately in accordance with certain procedures to enhance or promote the adjustment of height Motor power can be used directly or can also be manually operated. It’s a form of structure and assembly, and the height can be customized user requirements

Product Description
Technical data:
1. Lift speed: 150mm/min~1800mm/min
2. Input power:0.5 -21.8KW
3. Screw rang: 5-16 mm
4. Bearing range: 2T-100T
5. Structure: motor direct connection, single & double shaft
Characteristic:
Standardize & series design
Reverse operation

Product Parameters

Type

Model

Screw thread size

Max
lifting strength
kN

Max
pull force
kN

Weight without stroke
kg

Screw weight
per 100mm

SWL

Screw jack

SWL2.5

Tr30*6

25

25

7.3

0.45

SWL5

Tr40*7

50

50

16.2

0.82

SWL10/15

Tr58*12

100/150

99

25

1.67

SWL20

Tr65*12

200

166

36

2.15

SWL25

Tr90*16

250

250

70.5

4.15

SWL35

Tr100*18

350

350

87

5.20

SWL50

Tr120*20

500

500

420

7.45

SWL100

Tr160*23

1000

1000

1571

13.6

SWL120

Tr180*25

1200

1200

1350

17.3

1.Compact structure,Small size.Easy mounting,varied types.  Can be applied in 1 unit or multiple units.

2.High reliability.Long service life; With the function of   ascending,descending,thrusting,overturning

3.Wide motivity.It can be drived by  electrical motor and manual force.

4.It is usually used in low speed situation,widely used in the fields of
metallurgy,mechanical,construction,chemical,irrigation works,mediat treatment.

Detailed Photos

 

1. screw rod

2. nut bolt

3. cover

4.Skeleton oil seal

5.Bearing

6.Worm gear

7.Oil filling hole

8.Case

9.Skeleton oil seal

10.Cover

11. nut bolt

12.Bearing

13.Skeleton oil seal

14.Bearing

15.worm

16.Flat key

17.Bearing

18.Skeleton oil seal

19.Cover

20.Nut bolt

Product Description

 

Packaging & Shipping

 

Company Profile

 

Standard or Nonstandard: Nonstandard
Application: Textile Machinery, Garment Machinery, Conveyer Equipment, Electric Cars, Motorcycle, Food Machinery, Marine, Mining Equipment, Agricultural Machinery, Car, Power Transmission
Product Name: Swl Series Worm Gear Lift
Input Speed: 0-1440rpm
Ratio: 6-36
Applicable Industries: Hotels, Manufacturing Plant, Food & Beverage Facto
Samples:
US$ 50/Piece
1 Piece(Min.Order)

|
Request Sample

screw gear

How do you maintain and service a screw gear system?

Maintaining and servicing a screw gear system, also known as a worm gear system, is essential to ensure its optimal performance, longevity, and reliability. Regular maintenance and proper servicing help identify and address issues before they escalate into major problems. Here’s a detailed explanation of how to maintain and service a screw gear system:

  1. Establish a Maintenance Schedule: Create a maintenance schedule for the screw gear system based on the manufacturer’s recommendations, operating conditions, and the system’s usage. The schedule should include routine inspections, lubrication, cleaning, and any other specific maintenance tasks.
  2. Visual Inspection: Regularly inspect the screw gear system visually. Check for any signs of wear, damage, misalignment, or unusual noise or vibration. Look for oil leaks, loose fasteners, or any other visible issues that may affect the performance of the system.
  3. Lubrication: Ensure that the screw gear system is properly lubricated. Monitor the lubricant level and condition regularly. Follow the manufacturer’s guidelines regarding the type of lubricant to use, the recommended viscosity, and the lubrication intervals. Replenish or replace the lubricant as necessary to maintain optimal lubrication and reduce friction.
  4. Cleaning: Keep the screw gear system clean and free from debris, dirt, or contaminants. Regularly clean the gears, shafts, and other components using appropriate cleaning methods and agents. Be careful not to damage any of the components during the cleaning process.
  5. Alignment Check: Periodically check the alignment of the screw gear system. Misalignment can lead to increased wear, reduced efficiency, and premature failure. Ensure that the worm gear and worm wheel are properly aligned axially and radially. If misalignment is detected, make the necessary adjustments to bring the gears back into proper alignment.
  6. Bearing Maintenance: If the screw gear system includes bearings, inspect and maintain them regularly. Check for any signs of wear, excessive play, or noise. Lubricate the bearings according to the manufacturer’s recommendations. Replace any worn or damaged bearings promptly.
  7. Load and Performance Testing: Periodically perform load and performance testing on the screw gear system. This helps assess its functionality, efficiency, and torque capacity. Analyze the test results and compare them to the system’s specifications. If any deviations or performance issues are identified, take appropriate measures to rectify them.
  8. Component Replacement: Over time, certain components of the screw gear system may wear out and require replacement. Keep a record of the system’s maintenance history and track the lifespan of critical components. Replace worn or damaged gears, bearings, seals, or other components as needed to ensure the system’s reliability and performance.
  9. Documentation: Maintain thorough documentation of all maintenance activities, including inspection reports, lubrication records, component replacements, and any repairs or adjustments made. This documentation helps track the system’s maintenance history, identify recurring issues, and plan future maintenance tasks.

It is important to note that the maintenance and service procedures may vary based on the specific screw gear system, its design, and the manufacturer’s recommendations. Therefore, always refer to the manufacturer’s documentation and guidelines for detailed instructions specific to the screw gear system being serviced.

screw gear

Can screw gears be used in both vertical and horizontal orientations?

Yes, screw gears, also known as worm gears, can be used in both vertical and horizontal orientations. The suitability of screw gears for a particular orientation depends on several factors. Here’s a detailed explanation of using screw gears in vertical and horizontal orientations:

Vertical Orientation:

Screw gears can be used in vertical orientations, such as when the worm gear is positioned vertically above or below the worm wheel. However, there are some considerations to keep in mind:

  • Self-Locking Capability: One advantage of screw gears is their self-locking capability, which means they can hold position without additional braking mechanisms. In vertical orientations, this self-locking feature can be beneficial, especially when the load needs to be held in position without the need for external support or brakes.
  • Lubrication: Proper lubrication is crucial in vertical screw gear applications to ensure efficient power transmission and minimize wear. Gravity can affect lubricant distribution, so it is essential to use lubricants with appropriate viscosity and ensure adequate lubrication reaches all gear surfaces even in a vertical configuration.
  • Load and Torque: The weight of the load being transmitted through the screw gear system is an important consideration in vertical orientations. Vertical applications often involve lifting or supporting heavy loads, and the torque requirements can be high. It is important to ensure that the screw gear system is designed to handle the specific load and torque demands of the vertical application.

Horizontal Orientation:

Screw gears can also be used in horizontal orientations, where the worm gear and worm wheel are positioned parallel to the ground. Here are some considerations for using screw gears in horizontal orientations:

  • Lubrication: Proper lubrication is still important in horizontal screw gear applications to minimize friction, wear, and heat generation. The lubricant viscosity and type should be chosen to provide adequate film thickness and reduce sliding friction between the gear surfaces.
  • Efficiency: Screw gears generally have lower mechanical efficiency compared to some other gear types. In horizontal orientations, where efficiency is critical for power transmission, it is important to consider the gear design and material selection to minimize energy losses and maximize the overall system efficiency.
  • Load Distribution: In horizontal orientations, the load distribution between the worm gear and the worm wheel is typically more uniform compared to vertical orientations. This can help reduce tooth stresses and increase the overall stability of the gear system.
  • Mounting and Support: Proper mounting and support of the screw gear system are important in horizontal orientations to ensure alignment and minimize vibrations. Adequate support structures, such as rigid bases or frames, should be used to maintain the gear system’s stability and integrity.

In summary, screw gears can be used in both vertical and horizontal orientations. However, the specific application requirements, including load, torque, lubrication, and efficiency considerations, should be carefully evaluated to ensure the screw gear system is suitable and designed to meet the demands of the particular orientation.

screw gear

How do screw gears contribute to linear motion and power transmission?

Screw gears, also known as worm gears, play a significant role in achieving linear motion and power transmission in various mechanical systems. Here’s a detailed explanation of how screw gears contribute to these functions:

Linear Motion:

Screw gears can convert rotary motion into linear motion or vice versa through the interaction between the worm and the worm wheel. The helical threads on the worm and the teeth on the worm wheel create a sliding and rolling contact that results in linear displacement along the axis of the screw. This mechanism enables precise control and positioning of linear motion in different applications.

The linear motion contribution of screw gears can be observed in the following scenarios:

  • Lead Screw Mechanisms: When the worm gear is used as a lead screw, it converts the rotary motion of the worm into linear motion along the screw’s axis. By rotating the worm, the worm wheel moves linearly, allowing for controlled and precise linear positioning. Lead screw mechanisms are widely used in applications such as CNC machines, 3D printers, and linear actuators.
  • Linear Motion Conversion: In certain applications, the linear motion of a load can be converted into rotary motion using screw gears. By fixing the worm wheel and applying linear force to the worm, the rotation of the worm can drive the rotary motion of other components. This conversion is utilized in applications such as conveyor systems, lifting mechanisms, and material handling equipment.

Power Transmission:

Screw gears are effective in power transmission due to their unique characteristics. Here’s how they contribute to power transmission:

  • Gear Reduction: Screw gears provide significant gear reduction, which is the ratio between the input speed and the output speed. This reduction allows for a smaller input speed to generate a larger output torque, making screw gears suitable for applications requiring high torque and low-speed rotation. The gear reduction capability of screw gears enables efficient power transmission, especially in scenarios where high torque is necessary.
  • Torque Multiplication: Through the interaction of the helical threads on the worm and the teeth on the worm wheel, screw gears multiply torque. The mechanical advantage gained through the screw gear mechanism enables the transmission of higher torque to drive loads with increased force. This torque multiplication is essential in applications that require heavy lifting, load handling, and power transmission with minimal slippage.

By combining the ability to convert rotary motion into linear motion and providing efficient power transmission, screw gears find widespread use in a range of applications. They are employed in industries such as manufacturing, automation, robotics, material handling, and various other systems that require precise linear motion control and effective power transmission.

China supplier Sml Series Worm Gear Screw Jack Electric Screw Jack Bevel Gear Screw Jack top gearChina supplier Sml Series Worm Gear Screw Jack Electric Screw Jack Bevel Gear Screw Jack top gear
editor by CX 2023-09-04

Tags: